MySQL parameters

Parameters for creating a service

These parameters are provided as parameters in the method CreateService.

When creating a new service, the parameters marked as Required should be provided.

If the selected version MySQL supports other parameters, they can be set in the options parameter.

vendor

MySQL DBMS engine vendor.

Required	Datatype	Valid Values
Yes	String	mariadb percona mysql

version

DBMS engine version. Version depends on the vendor.

Required	Datatype	Valid Values
Yes	String	mariadb: 10.2, 10.3, 10.4, 10.5, 10.6, 10.7; percona: 5.7, 8.0; mysql: 5.7, 8.0

max_connections

The maximum permitted number of simultaneous client connections that a MySQL host can handle

Required	Datatype	Valid Values	Default	Auto
No	Integer	1–100000	151	MiB RAM/32, min 151

max_allowed_packet

The maximum size of one packet or any generated/intermediate string, or any parameter sent by the`mysql_stmt_send_long_data() <https://dev.mysql.com/doc/c-api/8.0/en/mysql-stmt-send-long-data.html>`_.

Required	Datatype	Valid Values	Default	Auto
Yes	Integer	1024–1073741824	16 MiB (MariaDB); 64 MiB (Percona)	N/A

max_connect_errors

Maximum number of connection errors, at which the server blocks the host from further connections

Required	Datatype	Valid Values	Default	Auto
No	Integer	1– 18446744073709551615	100	N/A

innodb_buffer_pool_size

InnoDB buffer size (in bytes) used to cache table data and indexes. A larger buffer allows you to reduce the number of I/O operations when repeatedly accessing the same data.

Required	Datatype	Valid Values	Default	Auto
No	Integer	5242880– 9223372036854775807	128 MiB	50% RAM, if ≤ 4 GiB; 75% RAM, if ≥ 4 GiB

innodb_buffer_pool_instances

The number of regions that innodb_buffer_pool_size is divided into when innodb_buffer_pool_size > 1 GiB. Dividing the buffer pool allows you to use it more efficiently. This parameter is relevant for Percona 5.7, 8.0 и MariaDB 10.2, 10.3, 10.4.

Required	Datatype	Valid Values	Default	Auto
No	Integer	1–64	8 or 1, if innodb_buffer_pool_size < 1GiB	The number of full GiB in innodb_buffer_pool_size, if the parameter value is greater than 1 GiB

innodb_log_file_size

The size of a single file in bytes in the redo system log. The larger the value, the less checkpoint flush activity is required in the buffer pool, saving disk I/O.

Required	Datatype	Valid Values	Default	Auto
No	Integer	4 MiB–512 GiB	96 MiB (for MariaDB v.10.5 and higher) 48 MiB (for MariaDB v.10.4 and lower) 48 MiB (for Percona 8)	(innodb_buffer_pool_size × 25%)/2, but no more than 4 GiB

innodb_log_files_in_group

The number of system log files in a log group

Required	Datatype	Valid Values	Default	Auto
No	Integer	2–100	2	N/A

innodb_change_buffering

This parameter controls the cached data to optimize delays for write operations to secondary indexes so that the I/O operations can be performed sequentially.

Required	Datatype	Valid Values	Default	Auto
No	String	inserts none deletes purges changes all none	none: ≥ MariaDB 10.5.15, 10.6.7, 10.7.3, 10.8.2; all: ≤ MariaDB 10.5.14, 10.6.6, 10.7.2, 10.8.1; Percona 8	N/A

innodb_io_capacity

The number of I/O operations per second (IOPS) available to InnoDB background tasks.

Required	Datatype	Valid Values	Default	Auto
No	Integer	100– 18446744073709551615	200	N/A

innodb_io_capacity_max

The maximum number of IOPS that InnoDB background tasks can perform.

Required	Datatype	Valid Values	Default	Auto
No	Integer	100– 18446744073709551615	max(innodb_io_capacity × 2, 2000)	N/A

innodb_purge_threads

The number of background threads allocated for the InnoDB purge operation. Increasing the value improve the efficiency systems where data operations are performed on multiple tables

Required	Datatype	Valid Values	Default	Auto
No	Integer	1–32	4	N/A

innodb_thread_concurrency

The maximum number of threads permitted inside of InnoDB. This parameter is relevant for Percona 5.7, 8.0 and MariaDB 10.2, 10.3, 10.4.

Required	Datatype	Valid Values	Default	Auto
No	Integer	0–1000	0	N/A

innodb_sync_array_size

The size of the mutex/lock wait array. Increasing the value increases the level of parallelism when the number of waiting threads is large. This parameter is relevant for Percona 5.7, 8.0 and MariaDB 10.2, 10.3, 10.4.

Required	Datatype	Valid Values	Default	Auto
No	Integer	1–1024	1	N/A

innodb_flush_log_at_trx_commit

Controls the MySQL behaviour for transaction commit operations.

• 0 — Logs are written and flushed to disk once per second. Transactions for which logs have not been flushed can be lost in a crash.

• 1 (default) — This value provides for the highest availability level. InnoDB redo logs are written and flushed to disk at each transaction commit.

• 2 — InnoDB redo logs are written after each transaction commit and flushed to disk once per second. An OS or power outage can cause the loss of transactions in the last second.

Required	Datatype	Valid Values	Default	Auto
No	Integer	0 1 2	1	N/A

thread_cache_size

The number of threads that the server caches to establish new network connections.

Required	Datatype	Valid Values	Default	Auto
No	Integer	0–16384	-1 (autosizing)	N/A

tmp_table_size

The maximum size of internal in-memory temporary tables (bytes). This parameter does not apply to user-created MEMORY tables.

Required	Datatype	Valid Values	Default	Auto
No	Integer	1024–4294967295	16 MiB	N/A

max_heap_table_size

The maximum size in bytes to which user-created MEMORY tables are permitted to grow. The value of the variable is used to calculate MEMORY table MAX_ROWS values.

Required	Datatype	Valid Values	Default	Auto
No	Integer	16384–4294966272	16 MiB	N/A

table_open_cache

The number of open tables for all threads. Increasing this value increases the number of file descriptors that mysqld requires.

Required	Datatype	Valid Values	Default	Auto
No	Integer	1–1048576	MariaDB: 2000 Percona 5.7: 2000 Percona 8: 4000	N/A

transaction_isolation

The transaction isolation level. See the MySQL documentation.

Required	Datatype	Valid Values	Default	Auto
No	String	REPEATABLE-READ READ-UNCOMMITTED READ-COMMITTED SERIALIZABLE	REPEATABLE-READ	N/A

wait_timeout

The number of seconds the server waits for activity on a noninteractive connection before closing it.

Required	Datatype	Valid Values	Default	Auto
No	Numeric	1–31536000	28800	N/A

connect_timeout

The number of seconds that the mysqld server waits for a connect packet before responding with Bad handshake.

Required	Datatype	Valid Values	Default	Auto
No	Numeric	2–31536000	10	N/A

pxc_strict_mode

PXC mode. The supported modes are detailed in the Percona documentation. It is applicable only in a high-availability configuration and only to percona.

Required	Datatype	Valid Values	Default	Auto
Yes, if the High-availability service mode and percona vendor are selected.	String	DISABLED PERMISSIVE ENFORCING MASTER	ENFORCING	DISABLED

innodb_strict_mode

A MySQL operation mode. The supported mode are detailed in the MySQL documentation.

Required	Datatype	Valid Values	Default	Auto
Yes	String	ON OFF	ON	OFF

gcache_size

Gcache circular buffer storage size (the space the node uses for caching writesets), preallocated on startup.

Galera parameter. It is applicable only to a high-availability service.

Required	Datatype	Valid Values	Default	Auto
No	Integer	134217728–RAM/10	N/A	N/A

gcs_fc_limit

If the recv queue length exceeds the number of writesets, replication is suspended. There can be much more writesets in master-slave configurations. Replication will resume according to the gcs_fc_factor setting.

Galera parameter. It is applicable only to a high-availability service.

Required	Datatype	Valid Values	Default	Auto
No	Integer	1–2147483647	N/A	N/A

gcs_fc_factor

The fraction of gcs_fc_limit at which replication is resumed when the recv queue length falls below this value.

Galera parameter. It is applicable only to a high-availability service.

Required	Datatype	Valid Values	Default	Auto
No	Float	0.0–1.0	N/A	N/A

gcs_fc_master_slave

This variable indicates whether the cluster has only one source node. This determines whether the gcs_fc_limit parameter is dynamically recalculated (if false) or not (if true).

Deprecated parameter. It is applicable only to Percona 5.7, MySQL 5.7, and MariaDB 10.2 and 10.3.

Galera parameter. It is applicable only to a high-availability service.

Required	Datatype	Valid Values	Default	Auto
No	Boolean	true false	N/A	N/A

gcs_fc_single_primary

Indicates that there is more than one replication source. As the number of nodes in the cluster grows, the value of gcs_fc_limit dynamically increases. At the same time, the number of writes from nodes also increases. When this parameter is false (multi-primary), the gcs_fc_limit parameter is dynamically modified. This gives each node extra margin to be a bit further behind applying writes. The gcs_fc_limit parameter is modified as the square root of the cluster size, i.e., in a four-node cluster, it is twice the base value. This is done to compensate for the increasing replication rate noise.

This parameter replaces the deprecated gcs_fc_master_slave parameter and is applicable to Percona 8.0, MySQL 8.0, and MariaDB 10.4, 10.5, 10.6 and 10.7.

Galera parameter. It is applicable only to a high-availability service.

Required	Datatype	Valid Values	Default	Auto
No	Boolean	true false	N/A	N/A

monitoring - The monitoring information for the instance

Connection to a monitoring service.

Required	Editable	Datatype	Valid Values	Default
For all services, except for Prometheus	Yes	Boolean	true false	false

monitor_by

Monitoring service ID. The specified service must be deployed in the same project as the current service.

Required	Editable	Datatype	Valid Values
Yes, if the monitoring = true parameter is passed. If monitoring = false, the parameter cannot be passed	Yes	String	The ID of a monitoring service running within the same VPC as the current service

monitoring_labels

Labels to be assigned to the metrics of the monitored service in the monitoring service.

Required	Editable	Datatype	Valid Values
No. If monitoring = false, the parameter cannot be passed	Yes	Dict	The label name may contain digits, Latin letters, and an underscore character. The label value may contain any ASCII characters.

logging

Connection to a logging service.

Required	Editable	Datatype	Valid Values	Default
For all services, except for ELK and Prometheus	Yes	Boolean	true false	false

log_to

Logging service ID. The logged service must be deployed in the same project as the current service.

Required	Editable	Datatype	Valid Values	Default
Yes, if the logging = true parameter is passed. If logging = false, the parameter cannot be passed	Yes	String	The ID of a monitoring service running within the same VPC as the current service

logging_tags

Tags to be assigned in the logging service to the log records of the current service.

Required	Editable	Datatype	Valid Values	Default
No. If logging = false, the parameter cannot be passed	Yes	List of strings	String of 256 characters max

options

Container for other parameters MySQL.

Note

If the parameter name includes a dot, then it cannot be passed in the container for additional parameters. If you need to use such parameter, contact technical support.

Required	Datatype	Valid Values
No	Dict	N/A

galera_options

Container for other Galera parameters.

Note

If the parameter name includes a dot, then it cannot be passed in the container for additional parameters. If you need to use such parameter, contact technical support.

Required	Datatype	Valid Values
No	Dict	N/A

User creation parameters

These parameters are specified in the parameters attribute of the User object when the latter is passed in the users parameter of the ModifyService method.

The Editable property indicates whether the parameter value can be edited after the user has been created.

host

Required	Editable	Datatype	Valid Values	Default
No	No	String	Hostname up to 60 characters or IP address	%

password

Required	Editable	Datatype	Valid Values	Default
Yes	Yes	String	It should not contain such characters as ', ", ` and \	N/A

Parameters for creating a database

These parameters are specified in the parameters attribute of the Database object when the latter is passed in the databases parameter of the ModifyService method.

The Editable property indicates whether a parameter value can be edited after the database has been created.

The backup_id and backup_db_name parameters are used to restore a database from an existing backup. Information about existing backups can be obtained using the method ListBackups.

charset

Required	Editable	Datatype	Valid Values	Default
No	No	String	Supported values: For MariaDB: https://mariadb.com/kb/en/supported-character-sets-and-collations/ For MySQL and Percona: https://dev.mysql.com/doc/refman/8.0/en/charset-charsets.html	utf8

collate

Required	Editable	Datatype	Valid Values	Default
No	No	String	Supported values: For MariaDB: https://mariadb.com/kb/en/supported-character-sets-and-collations/ For MySQL and Percona: https://dev.mysql.com/doc/refman/8.0/en/charset-charsets.html	utf8_unicode_ci

backup_id

Database backup ID.

Required	Editable	Datatype	Valid Values	Default
No	No	String	ID of an existing database backup.	N/A

backup_db_name

The name of a database from the backup specified in the backup_id parameter.

Required	Editable	Datatype	Valid Values	Default
Yes, if backup_id is specified	No	String	The name of a database included in the backup	N/A

User parameters to set when creating a database

These parameters are specified in the parameters attribute of the User object, which is nested in the users attribute of the Database object when the latter is passed in the databases parameter of the ModifyService method.

The Editable property indicates whether a parameter value can be edited after the database has been created.

privileges

Required	Editable	Datatype	Valid Values	Default
No	Yes	Array of strings	ALL ALTER ALTER ROUTINE CREATE CREATE ROUTINE CREATE TEMPORARY TABLES CREATE VIEW DELETE DROP EVENT EXECUTE INDEX INSERT LOCK TABLES SELECT SHOW VIEW TRIGGER UPDATE	ALL

options

Required	Editable	Datatype	Valid Values	Default
No	Yes	Array of strings	GRANT NONE	N/A